Factory-direct survey & positioning equipment from Shanghai. MOQ 1 unit, OEM welcome. inquiry@marsgeosystems.comWhatsApp +86 176 2154 1688

Tractor auto-steering: costs, savings and payback

By the Mars Geosystems technical team. Updated .

Short answer: An RTK auto-steering system holds about ±2.5 cm pass-to-pass, which cuts the overlap of a typical manually steered tractor (often 5–10 % of implement width). On a farm with hundreds of hectares that overlap is seed, fertiliser, fuel and hours you no longer pay for; many farms recover the cost in one or two seasons. Use the calculator on this page with your own numbers.

Where the savings come from

Overlap between passes, skipped strips, and driver fatigue. With auto-steer each pass starts exactly where the last one ended, day or night, so you also gain working hours.

What a kit includes

An electric steering wheel motor, a GNSS RTK antenna and a guidance console. Our SAgro200 and SAgro180 install in about 30 minutes without hydraulics.

Corrections for agriculture

Use a local base station with radio for full independence, or CORS/NTRIP over 4G where coverage is good.

Try it with your numbers

Manual steering often overlaps 5–10 %.
Leave 0 if you have no quote yet – ask us for one.
Estimated overlap cost avoided$0/yr

Estimate only. Assumes overlap falls to near zero with ±2.5 cm RTK guidance.

Frequently asked

What accuracy do I need for seeding and spraying?

For row crops, bed forming and controlled traffic you want RTK, about ±2.5 cm pass-to-pass. Sub-metre GPS is only adequate for broad-acre spraying.

Will auto-steer work on an old tractor?

Usually yes, because the electric steering wheel replaces the original wheel rather than connecting to hydraulics.

Request a quote

Get a quotation within one business day

Tell us the products, quantity and destination. An engineer replies with a configured price, kit contents and delivery date.

Request a quotation

Filled in from your quote list. Edit freely.
We reply within one business day.

Need a configuration for your project? Ask an engineer.